Jul 10 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 10 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 10 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 10 2025 00:00:06  orcad: ERROR Modbus Read failed

Jul 10 2025 00:00:06  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 10 2025 00:00:14  orcad: profile(): pres= 20.82db prdp= 20.65m mwdp=   0.0 ipwr=13.8v epwr=26.4v
Jul 10 2025 00:03:04  orcad: movePackageUp(): pressureDepth = 3.764318; Pm1(recent)-4(older) = 4.084619, 4.261132, 4.452518, 4.646880
Jul 10 2025 00:03:05  orcad: ERROR Modbus Read failed

Jul 10 2025 00:03:05  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 10 2025 00:03:06  orcad: profile(): pres=  3.55db prdp=  3.52m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 10 2025 00:06:51  orcad: ERROR Modbus Read failed

Jul 10 2025 00:06:51  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 10 2025 00:06:52  orcad: profile(): pres= 74.94db prdp= 74.30m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 10 2025 00:10:16  orcad: movePackageUp(): pressureDepth = 20.960698; Pm1(recent)-4(older) = 21.085635, 21.259158, 21.482259, 21.672638
Jul 10 2025 00:10:17  orcad: ERROR Modbus Read failed

Jul 10 2025 00:10:17  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 10 2025 00:10:18  orcad: profile(): pres= 20.80db prdp= 20.63m mwdp=   0.0 ipwr=13.8v epwr=26.3v il_f=0.00a
Jul 10 2025 00:10:20  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13675.HEX
Jul 10 2025 00:12:27  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 10 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 10 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 10 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 10 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 10 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 10 2025 12:00:13  orcad: startLoggingCTD19Plus(): Failed sending STARTNOW command after two attempts.
Jul 10 2025 12:00:13  orcad: profile(): Failed to activate the CTD!
Jul 10 2025 12:00:13  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -2
Jul 10 2025 12:00:15  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 11 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 11 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 11 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 11 2025 00:00:06  orcad: ERROR Modbus Read failed

Jul 11 2025 00:00:06  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 00:00:14  orcad: profile(): pres= 20.74db prdp= 20.57m mwdp=   0.0 ipwr=13.9v epwr=26.4v
Jul 11 2025 00:03:08  orcad: movePackageUp(): pressureDepth = 3.900173; Pm1(recent)-4(older) = 4.026112, 4.174859, 4.364262, 4.551683
Jul 11 2025 00:03:09  orcad: ERROR Modbus Read failed

Jul 11 2025 00:03:09  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 00:03:10  orcad: profile(): pres=  3.68db prdp=  3.65m mwdp=   0.0 ipwr=13.9v epwr=26.4v il_f=0.00a
Jul 11 2025 00:07:00  orcad: ERROR Modbus Read failed

Jul 11 2025 00:07:00  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 00:07:00  orcad: profile(): pres= 74.89db prdp= 74.25m mwdp=   0.0 ipwr=13.9v epwr=26.4v il_f=0.00a
Jul 11 2025 00:10:25  orcad: movePackageUp(): pressureDepth = 20.847660; Pm1(recent)-4(older) = 21.007301, 21.176858, 21.367238, 21.542744
Jul 11 2025 00:10:26  orcad: ERROR Modbus Read failed

Jul 11 2025 00:10:26  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 00:10:27  orcad: profile(): pres= 20.78db prdp= 20.60m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 11 2025 00:10:29  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13676.HEX
Jul 11 2025 00:12:37  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 11 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 11 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 11 2025 12:00:07  orcad: profile(): Running profile with sunsaver!
Jul 11 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 11 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 12:00:15  orcad: profile(): pres= 20.89db prdp= 20.72m mwdp=   0.0 ipwr=13.8v epwr=27.3v
Jul 11 2025 12:03:04  orcad: movePackageUp(): pressureDepth = 3.919015; Pm1(recent)-4(older) = 4.076686, 4.263115, 4.490201, 4.731169
Jul 11 2025 12:03:05  orcad: ERROR Modbus Read failed

Jul 11 2025 12:03:05  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 12:03:06  orcad: profile(): pres=  3.67db prdp=  3.64m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 11 2025 12:06:43  orcad: ERROR Modbus Read failed

Jul 11 2025 12:06:43  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 12:06:44  orcad: profile(): pres= 74.89db prdp= 74.25m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 11 2025 12:09:56  orcad: movePackageUp(): pressureDepth = 20.899221; Pm1(recent)-4(older) = 21.077702, 21.295845, 21.488208, 21.657764
Jul 11 2025 12:09:57  orcad: ERROR Modbus Read failed

Jul 11 2025 12:09:57  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 11 2025 12:09:58  orcad: profile(): pres= 20.78db prdp= 20.61m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 11 2025 12:10:00  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13677.HEX
Jul 11 2025 12:12:03  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 12 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 12 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 12 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 12 2025 00:00:06  orcad: ERROR Modbus Read failed

Jul 12 2025 00:00:06  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 00:00:14  orcad: profile(): pres= 20.67db prdp= 20.49m mwdp=   0.0 ipwr=13.8v epwr=26.4v
Jul 12 2025 00:03:05  orcad: movePackageUp(): pressureDepth = 3.860508; Pm1(recent)-4(older) = 4.061811, 4.282948, 4.488217, 4.664730
Jul 12 2025 00:03:06  orcad: ERROR Modbus Read failed

Jul 12 2025 00:03:06  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 00:03:07  orcad: profile(): Using i2c backup 26.4v
Jul 12 2025 00:03:07  orcad: profile(): pres=  3.62db prdp=  3.59m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 12 2025 00:06:53  orcad: ERROR Modbus Read failed

Jul 12 2025 00:06:53  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 00:06:54  orcad: profile(): pres= 74.99db prdp= 74.35m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 12 2025 00:10:18  orcad: movePackageUp(): pressureDepth = 20.955740; Pm1(recent)-4(older) = 21.072744, 21.230402, 21.414833, 21.580423
Jul 12 2025 00:10:20  orcad: ERROR Modbus Read failed

Jul 12 2025 00:10:20  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 00:10:20  orcad: profile(): pres= 20.85db prdp= 20.67m mwdp=   0.0 ipwr=13.8v epwr=26.3v il_f=0.00a
Jul 12 2025 00:10:22  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13678.HEX
Jul 12 2025 00:12:30  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 12 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 12 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 12 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 12 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 12 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 12:00:14  orcad: profile(): pres= 20.85db prdp= 20.67m mwdp=   0.0 ipwr=13.8v epwr=27.3v
Jul 12 2025 12:03:02  orcad: movePackageUp(): pressureDepth = 3.969588; Pm1(recent)-4(older) = 4.186758, 4.401945, 4.593331, 4.789676
Jul 12 2025 12:03:03  orcad: ERROR Modbus Read failed

Jul 12 2025 12:03:03  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 12:03:04  orcad: profile(): pres=  3.69db prdp=  3.66m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 12 2025 12:06:40  orcad: ERROR Modbus Read failed

Jul 12 2025 12:06:40  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 12:06:40  orcad: profile(): pres= 74.84db prdp= 74.20m mwdp=   0.0 ipwr=13.8v epwr=27.3v il_f=0.00a
Jul 12 2025 12:09:56  orcad: movePackageUp(): pressureDepth = 20.988462; Pm1(recent)-4(older) = 21.189748, 21.359305, 21.478292, 21.609178
Jul 12 2025 12:09:57  orcad: ERROR Modbus Read failed

Jul 12 2025 12:09:57  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 12 2025 12:09:58  orcad: profile(): pres= 20.98db prdp= 20.80m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 12 2025 12:10:00  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13679.HEX
Jul 12 2025 12:12:05  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 13 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 13 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 13 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 13 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 13 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 00:00:08  orcad: profile(): volt low - using i2c backup 26.4v
Jul 13 2025 00:00:16  orcad: profile(): pres= 21.01db prdp= 20.83m mwdp=   0.0 ipwr=13.8v epwr=26.4v
Jul 13 2025 00:03:06  orcad: movePackageUp(): pressureDepth = 3.865466; Pm1(recent)-4(older) = 4.051895, 4.261132, 4.444585, 4.601265
Jul 13 2025 00:03:08  orcad: ERROR Modbus Read failed

Jul 13 2025 00:03:08  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 00:03:08  orcad: profile(): pres=  3.66db prdp=  3.63m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 13 2025 00:06:56  orcad: ERROR Modbus Read failed

Jul 13 2025 00:06:56  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 00:06:57  orcad: profile(): pres= 74.94db prdp= 74.30m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 13 2025 00:10:23  orcad: movePackageUp(): pressureDepth = 20.966647; Pm1(recent)-4(older) = 21.126289, 21.278989, 21.482259, 21.688503
Jul 13 2025 00:10:25  orcad: ERROR Modbus Read failed

Jul 13 2025 00:10:25  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 00:10:25  orcad: profile(): pres= 20.77db prdp= 20.59m mwdp=   0.0 ipwr=13.8v epwr=26.3v il_f=0.00a
Jul 13 2025 00:10:27  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13680.HEX
Jul 13 2025 00:12:35  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 13 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 13 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 13 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 13 2025 12:00:06  orcad: ERROR Modbus Read failed

Jul 13 2025 12:00:06  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 12:00:09  orcad: startLoggingCTD19Plus(): Failed sending first INITLOGGING command ( retries = 0 ).
Jul 13 2025 12:00:14  orcad: profile(): pres= 20.44db prdp= 20.27m mwdp=   0.0 ipwr=13.8v epwr=27.2v
Jul 13 2025 12:03:02  orcad: movePackageUp(): pressureDepth = 3.855549; Pm1(recent)-4(older) = 4.035037, 4.234357, 4.431694, 4.596306
Jul 13 2025 12:03:03  orcad: ERROR Modbus Read failed

Jul 13 2025 12:03:03  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 12:03:04  orcad: profile(): pres=  3.64db prdp=  3.61m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 13 2025 12:06:42  orcad: ERROR Modbus Read failed

Jul 13 2025 12:06:42  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 12:06:43  orcad: profile(): pres= 74.85db prdp= 74.21m mwdp=   0.0 ipwr=13.8v epwr=27.3v il_f=0.00a
Jul 13 2025 12:10:04  orcad: movePackageUp(): pressureDepth = 20.815930; Pm1(recent)-4(older) = 21.024158, 21.174875, 21.300803, 21.463419
Jul 13 2025 12:10:05  orcad: ERROR Modbus Read failed

Jul 13 2025 12:10:05  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 13 2025 12:10:06  orcad: profile(): pres= 20.74db prdp= 20.57m mwdp=   0.0 ipwr=13.8v epwr=27.3v il_f=0.00a
Jul 13 2025 12:10:08  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13681.HEX
Jul 13 2025 12:12:13  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 14 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 14 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 14 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 14 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 14 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 00:00:15  orcad: profile(): pres= 21.17db prdp= 20.99m mwdp=   0.0 ipwr=13.8v epwr=26.4v
Jul 14 2025 00:03:08  orcad: movePackageUp(): pressureDepth = 3.940831; Pm1(recent)-4(older) = 4.108419, 4.280964, 4.460452, 4.629030
Jul 14 2025 00:03:09  orcad: ERROR Modbus Read failed

Jul 14 2025 00:03:09  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 00:03:10  orcad: profile(): pres=  3.73db prdp=  3.70m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 14 2025 00:07:01  orcad: ERROR Modbus Read failed

Jul 14 2025 00:07:01  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 00:07:02  orcad: profile(): pres= 74.95db prdp= 74.31m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 14 2025 00:10:29  orcad: movePackageUp(): pressureDepth = 20.888314; Pm1(recent)-4(older) = 21.064812, 21.266099, 21.450529, 21.606203
Jul 14 2025 00:10:30  orcad: ERROR Modbus Read failed

Jul 14 2025 00:10:30  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 00:10:31  orcad: profile(): pres= 20.82db prdp= 20.65m mwdp=   0.0 ipwr=13.8v epwr=26.3v il_f=0.00a
Jul 14 2025 00:10:33  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13682.HEX
Jul 14 2025 00:12:42  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 14 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 14 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 14 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 14 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 14 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 12:00:14  orcad: profile(): pres= 20.52db prdp= 20.35m mwdp=   0.0 ipwr=13.8v epwr=27.3v
Jul 14 2025 12:03:05  orcad: movePackageUp(): pressureDepth = 3.878357; Pm1(recent)-4(older) = 4.032062, 4.423761, 4.656796, 4.841241
Jul 14 2025 12:03:07  orcad: ERROR Modbus Read failed

Jul 14 2025 12:03:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 12:03:07  orcad: profile(): pres=  3.64db prdp=  3.61m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 14 2025 12:06:50  orcad: ERROR Modbus Read failed

Jul 14 2025 12:06:50  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 12:06:51  orcad: profile(): pres= 74.91db prdp= 74.27m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 14 2025 12:10:11  orcad: movePackageUp(): pressureDepth = 20.843694; Pm1(recent)-4(older) = 21.031099, 21.208588, 21.355339, 21.513988
Jul 14 2025 12:10:13  orcad: ERROR Modbus Read failed

Jul 14 2025 12:10:13  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 14 2025 12:10:14  orcad: profile(): pres= 20.75db prdp= 20.57m mwdp=   0.0 ipwr=13.8v epwr=27.0v il_f=0.00a
Jul 14 2025 12:10:16  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13683.HEX
Jul 14 2025 12:12:22  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 15 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 15 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 15 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 15 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 15 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 15 2025 00:00:13  orcad: startLoggingCTD19Plus(): Failed sending STARTNOW command after two attempts.
Jul 15 2025 00:00:13  orcad: profile(): Failed to activate the CTD!
Jul 15 2025 00:00:13  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -2
Jul 15 2025 00:00:16  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 15 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 15 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 15 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 15 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 15 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 15 2025 12:00:09  orcad: startLoggingCTD19Plus(): Failed sending first INITLOGGING command ( retries = 0 ).
Jul 15 2025 12:00:14  orcad: profile(): pres= 21.00db prdp= 20.83m mwdp=   0.0 ipwr=13.8v epwr=27.1v
Jul 15 2025 12:03:10  orcad: movePackageUp(): pressureDepth = 3.976530; Pm1(recent)-4(older) = 4.141143, 4.302780, 4.470368, 4.651838
Jul 15 2025 12:03:11  orcad: ERROR Modbus Read failed

Jul 15 2025 12:03:11  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 15 2025 12:03:12  orcad: profile(): pres=  3.78db prdp=  3.75m mwdp=   0.0 ipwr=13.8v epwr=27.2v il_f=0.00a
Jul 15 2025 12:06:54  orcad: ERROR Modbus Read failed

Jul 15 2025 12:06:54  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 15 2025 12:06:55  orcad: profile(): pres= 74.87db prdp= 74.23m mwdp=   0.0 ipwr=13.8v epwr=27.3v il_f=0.00a
Jul 15 2025 12:10:09  orcad: movePackageUp(): pressureDepth = 20.795107; Pm1(recent)-4(older) = 21.047955, 21.256183, 21.409875, 21.558609
Jul 15 2025 12:10:11  orcad: ERROR Modbus Read failed

Jul 15 2025 12:10:11  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 15 2025 12:10:11  orcad: profile(): pres= 20.66db prdp= 20.48m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 15 2025 12:10:13  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13684.HEX
Jul 15 2025 12:12:19  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 16 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 16 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 16 2025 00:00:07  orcad: profile(): Running profile with sunsaver!
Jul 16 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 16 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 00:00:16  orcad: profile(): pres= 21.04db prdp= 20.86m mwdp=   0.0 ipwr=13.8v epwr=26.5v
Jul 16 2025 00:03:14  orcad: movePackageUp(): pressureDepth = 3.989421; Pm1(recent)-4(older) = 4.139159, 4.303772, 4.503092, 4.702412
Jul 16 2025 00:03:15  orcad: ERROR Modbus Read failed

Jul 16 2025 00:03:15  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 00:03:16  orcad: profile(): pres=  3.76db prdp=  3.73m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 16 2025 00:07:05  orcad: ERROR Modbus Read failed

Jul 16 2025 00:07:05  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 00:07:06  orcad: profile(): pres= 74.96db prdp= 74.32m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 16 2025 00:10:29  orcad: movePackageUp(): pressureDepth = 20.929960; Pm1(recent)-4(older) = 21.055888, 21.177850, 21.082660, 21.143145
Jul 16 2025 00:10:30  orcad: ERROR Modbus Read failed

Jul 16 2025 00:10:30  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 00:10:31  orcad: profile(): pres= 20.94db prdp= 20.76m mwdp=   0.0 ipwr=13.8v epwr=26.3v il_f=0.00a
Jul 16 2025 00:10:33  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13685.HEX
Jul 16 2025 00:12:42  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 16 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 16 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 16 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 16 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 16 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 12:00:15  orcad: profile(): pres= 20.94db prdp= 20.77m mwdp=   0.0 ipwr=13.8v epwr=27.2v
Jul 16 2025 12:03:03  orcad: movePackageUp(): pressureDepth = 3.999338; Pm1(recent)-4(older) = 4.191717, 4.366246, 4.558624, 4.747036
Jul 16 2025 12:03:04  orcad: ERROR Modbus Read failed

Jul 16 2025 12:03:04  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 12:03:05  orcad: profile(): pres=  3.75db prdp=  3.72m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 16 2025 12:06:42  orcad: ERROR Modbus Read failed

Jul 16 2025 12:06:42  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 12:06:43  orcad: profile(): pres= 74.95db prdp= 74.31m mwdp=   0.0 ipwr=13.8v epwr=27.0v il_f=0.00a
Jul 16 2025 12:09:59  orcad: movePackageUp(): pressureDepth = 20.955740; Pm1(recent)-4(older) = 21.158019, 21.344432, 21.520929, 21.694452
Jul 16 2025 12:10:00  orcad: ERROR Modbus Read failed

Jul 16 2025 12:10:00  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 16 2025 12:10:01  orcad: profile(): pres= 20.91db prdp= 20.73m mwdp=   0.0 ipwr=13.8v epwr=27.1v il_f=0.00a
Jul 16 2025 12:10:03  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13686.HEX
Jul 16 2025 12:12:07  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 17 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 17 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 17 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 17 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 17 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 17 2025 00:00:09  orcad: startLoggingCTD19Plus(): Failed sending first INITLOGGING command ( retries = 0 ).
Jul 17 2025 00:00:12  orcad: startLoggingCTD19Plus(): Failed sending OUTPUTFORMAT=3 command after two attempts.
Jul 17 2025 00:00:12  orcad: profile(): Failed to activate the CTD!
Jul 17 2025 00:00:12  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -2
Jul 17 2025 00:00:14  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 17 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 17 2025 12:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 17 2025 12:00:06  orcad: profile(): Running profile with sunsaver!
Jul 17 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 17 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 17 2025 12:00:14  orcad: profile(): pres= 20.99db prdp= 20.82m mwdp=   0.0 ipwr=13.8v epwr=27.3v
Jul 17 2025 12:03:04  orcad: movePackageUp(): pressureDepth = 3.994380; Pm1(recent)-4(older) = 4.192708, 4.393020, 4.570524, 4.724228
Jul 17 2025 12:03:05  orcad: ERROR Modbus Read failed

Jul 17 2025 12:03:05  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 17 2025 12:03:06  orcad: profile(): pres=  3.77db prdp=  3.73m mwdp=   0.0 ipwr=13.8v epwr=27.3v il_f=0.00a
Jul 17 2025 12:05:21  orcad: movePackageDown(): Status = EPROP; According to the pressure the winch is moving oppositely!
Jul 17 2025 12:05:21  orcad: movePackageDown(): pressureDepth = 44.628889; Pm1(recent)-4(older) = 44.777606, 44.926323, 45.058185, 45.098834
Jul 17 2025 12:05:21  orcad: movePackageDown(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000
Jul 17 2025 12:05:21  orcad: movePackageDown(): loop counts ( i ) = 211 
Jul 17 2025 12:05:22  orcad: profile(): Failed to move package down (status = -2).  The package may no longer be at parking depth!
Jul 17 2025 12:05:24  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3
Jul 17 2025 12:05:24  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13687.HEX
Jul 17 2025 12:06:41  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 18 2025 00:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 18 2025 00:00:06  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 18 2025 00:00:06  orcad: profile(): Running profile with sunsaver!
Jul 18 2025 00:00:07  orcad: ERROR Modbus Read failed

Jul 18 2025 00:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 18 2025 00:00:14  orcad: profile(): pres= 44.85db prdp= 44.47m mwdp=   0.0 ipwr=13.8v epwr=26.5v
Jul 18 2025 00:00:14  orcad: profile(): Warning package is *not* within 5 meters of parking depth ( 20 )! Continuing!
Jul 18 2025 00:04:20  orcad: movePackageUp(): pressureDepth = 3.868441; Pm1(recent)-4(older) = 4.068753, 4.244274, 4.423761, 4.612173
Jul 18 2025 00:04:22  orcad: ERROR Modbus Read failed

Jul 18 2025 00:04:22  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 18 2025 00:04:22  orcad: profile(): pres=  3.61db prdp=  3.58m mwdp=   0.0 ipwr=13.8v epwr=26.4v il_f=0.00a
Jul 18 2025 00:06:36  orcad: movePackageDown(): Status = EPROP; According to the pressure the winch is moving oppositely!
Jul 18 2025 00:06:36  orcad: movePackageDown(): pressureDepth = 45.133535; Pm1(recent)-4(older) = 45.256474, 45.382387, 45.495411, 45.516232
Jul 18 2025 00:06:36  orcad: movePackageDown(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000
Jul 18 2025 00:06:36  orcad: movePackageDown(): loop counts ( i ) = 206 
Jul 18 2025 00:06:36  orcad: profile(): Failed to move package down (status = -2).  The package may no longer be at parking depth!
Jul 18 2025 00:06:38  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3
Jul 18 2025 00:06:38  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13688.HEX
Jul 18 2025 00:08:08  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 18 2025 12:00:01  orcad: runJobs(): Running mission: Deep_Cast_Direct
Jul 18 2025 12:00:07  orcad: profile(): NOTE: Running profile without a meterwheel.  Winch control based on CTD pressure only.
Jul 18 2025 12:00:07  orcad: profile(): Running profile with sunsaver!
Jul 18 2025 12:00:07  orcad: ERROR Modbus Read failed

Jul 18 2025 12:00:07  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 18 2025 12:00:16  orcad: profile(): pres= 20.89db prdp= 20.72m mwdp=   0.0 ipwr=13.8v epwr=27.0v
Jul 18 2025 12:03:03  orcad: movePackageUp(): pressureDepth = 3.825800; Pm1(recent)-4(older) = 4.024129, 4.292864, 4.508050, 4.657788
Jul 18 2025 12:03:04  orcad: ERROR Modbus Read failed

Jul 18 2025 12:03:04  orcad: profile(): Could not read voltage from the sunsaver, using old method!
Jul 18 2025 12:03:05  orcad: profile(): pres=  3.63db prdp=  3.60m mwdp=   0.0 ipwr=13.8v epwr=26.8v il_f=0.00a
Jul 18 2025 12:05:15  orcad: movePackageDown(): Status = EPROP; According to the pressure the winch is moving oppositely!
Jul 18 2025 12:05:15  orcad: movePackageDown(): pressureDepth = 45.377430; Pm1(recent)-4(older) = 45.490454, 45.611410, 45.766075, 45.830519
Jul 18 2025 12:05:15  orcad: movePackageDown(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000
Jul 18 2025 12:05:15  orcad: movePackageDown(): loop counts ( i ) = 201 
Jul 18 2025 12:05:16  orcad: profile(): Failed to move package down (status = -2).  The package may no longer be at parking depth!
Jul 18 2025 12:05:18  orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3
Jul 18 2025 12:05:18  orcad: runJobs(): Creating /usr/local/orcaD/data/202507/NPBY1_CAST13689.HEX
Jul 18 2025 12:06:34  orcad: runJobs(): Completed mission: Deep_Cast_Direct

Jul 18 2025 12:36:33  orcad: cleanup(): Caught exit signal ( 15 )!  Attempting to shutdown cleanly...
Jul 18 2025 12:36:33  orcad: cleanup(): All lights are shut off, the stove is off  and the cat is fed.  Leaving for good.  Cya!