Oct 08 2024 15:16:27 orcad: Starting up ( version 0.9.17_test )... Oct 08 2024 15:16:34 orcad: initializeHardware(): Sunsaver Measurements: battery voltage: 26.516724, array voltage: 35.742188, load voltage: 26.528931, charging current: 0.000000, load current: 0.072473 GLOBAL PARAMETERS ----------------- isDaemon = 0 debugLevel = 4 configFileName = /usr/local/orcaD/orcad.cfg min_depth = 3 max_depth = 85 parking_depth = 20 data_file_prefix = ORCA3_CAST data_storage_dir = /usr/local/orcaD/data last_cast_num = 15674 weather_data_prefix = ORCA3_MET weather_archive_download_period = 1440 weather_status_filename = weather-status.dat ctd_cal_PA1 = 2.482456e+02 ctd_cal_PA2 = -6.524518e-02 ctd_cal_PA3 = 5.430179e-08 solar_calibration_constant = 6.490000e+00 INFO: Assuming Licor 2420 Light Sensor Amplifier with 0.150 gain compass_declination = 1.600000e+01 meterwheel_cfactor = 1.660000e-01 SERIAL DEVICES -------------- RS232 Port description = A happy little CTD device_type = SEABIRD_CTD_19_PLUS tty = /dev/ttyUSB1 baud = 9600 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = GILLMETPAK tty = /dev/ttyUSB2 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = S9VAISALA tty = /dev/ttyUSB3 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little seafet device_type = SUNSAVER tty = /dev/ttyUSB7 baud = 9600 stop_bits = 2 data_bits = 8 flow_control = none parity = none MISSIONS -------- name = Deep_Cast_Direct start_min = 20 start_hour = 0,15 start_day_of_month = * start_month = * start_day_of_week = * equilibration_time = 20 aux_sample_direction = down cycles = 1.0 depths = Oct 08 2024 15:20:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 08 2024 15:20:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 08 2024 15:20:06 orcad: profile(): Running profile with sunsaver! Oct 08 2024 15:20:13 orcad: profile(): pres= 20.87db prdp= 20.69m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 08 2024 15:23:09 orcad: movePackageUp(): pressureDepth = 3.854558; Pm1(recent)-4(older) = 4.101477, 4.258157, 4.417811, 4.583415 Oct 08 2024 15:23:11 orcad: profile(): pres= 3.60db prdp= 3.57m mwdp= 0.0 ipwr=13.9v epwr=26.5v il_f=0.06a Oct 08 2024 15:28:02 orcad: profile(): pres= 85.18db prdp= 84.45m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.07a Oct 08 2024 15:32:07 orcad: movePackageUp(): pressureDepth = 20.938884; Pm1(recent)-4(older) = 21.095550, 21.259158, 21.424748, 21.586372 Oct 08 2024 15:32:08 orcad: profile(): pres= 20.88db prdp= 20.70m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.20a Oct 08 2024 15:32:10 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15675.HEX Oct 08 2024 15:34:36 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 08 2024 15:39:09 orcad: cleanup(): Caught exit signal ( 15 )! Attempting to shutdown cleanly... Oct 08 2024 15:39:09 orcad: cleanup(): All lights are shut off, the stove is off and the cat is fed. Leaving for good. Cya! Oct 08 2024 15:39:35 orcad: Starting up ( version 0.9.17_test )... Oct 08 2024 15:39:42 orcad: initializeHardware(): Sunsaver Measurements: battery voltage: 26.492310, array voltage: 27.621460, load voltage: 26.495361, charging current: 0.372029, load current: 0.014495 GLOBAL PARAMETERS ----------------- isDaemon = 0 debugLevel = 4 configFileName = /usr/local/orcaD/orcad.cfg min_depth = 3 max_depth = 85 parking_depth = 20 data_file_prefix = ORCA3_CAST data_storage_dir = /usr/local/orcaD/data last_cast_num = 15675 weather_data_prefix = ORCA3_MET weather_archive_download_period = 1440 weather_status_filename = weather-status.dat ctd_cal_PA1 = 2.482456e+02 ctd_cal_PA2 = -6.524518e-02 ctd_cal_PA3 = 5.430179e-08 solar_calibration_constant = 6.490000e+00 INFO: Assuming Licor 2420 Light Sensor Amplifier with 0.150 gain compass_declination = 1.600000e+01 meterwheel_cfactor = 1.660000e-01 SERIAL DEVICES -------------- RS232 Port description = A happy little CTD device_type = SEABIRD_CTD_19_PLUS tty = /dev/ttyUSB1 baud = 9600 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = GILLMETPAK tty = /dev/ttyUSB2 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = S9VAISALA tty = /dev/ttyUSB3 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little seafet device_type = SUNSAVER tty = /dev/ttyUSB7 baud = 9600 stop_bits = 2 data_bits = 8 flow_control = none parity = none MISSIONS -------- name = Deep_Cast_Direct start_min = 0 start_hour = 0,12 start_day_of_month = * start_month = * start_day_of_week = * equilibration_time = 20 aux_sample_direction = down cycles = 1.0 depths = Oct 09 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 09 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 09 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 09 2024 00:00:14 orcad: profile(): pres= 20.27db prdp= 20.10m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 09 2024 00:03:09 orcad: movePackageUp(): pressureDepth = 3.923973; Pm1(recent)-4(older) = 4.082636, 4.226424, 4.379137, 4.544741 Oct 09 2024 00:03:10 orcad: profile(): pres= 3.71db prdp= 3.67m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.28a Oct 09 2024 00:08:08 orcad: profile(): pres= 85.07db prdp= 84.34m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 09 2024 00:12:20 orcad: movePackageUp(): pressureDepth = 20.900213; Pm1(recent)-4(older) = 21.042006, 21.187765, 21.444579, 21.608186 Oct 09 2024 00:12:21 orcad: profile(): pres= 20.80db prdp= 20.62m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.21a Oct 09 2024 00:12:23 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15676.HEX Oct 09 2024 00:14:50 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 09 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 09 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 09 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 09 2024 12:00:14 orcad: profile(): pres= 21.24db prdp= 21.06m mwdp= 0.0 ipwr=13.9v epwr=26.9v Oct 09 2024 12:03:10 orcad: movePackageUp(): pressureDepth = 3.944797; Pm1(recent)-4(older) = 4.089577, 4.254190, 4.440619, 4.629030 Oct 09 2024 12:03:11 orcad: profile(): pres= 3.70db prdp= 3.67m mwdp= 0.0 ipwr=13.9v epwr=26.8v il_f=0.41a Oct 09 2024 12:07:59 orcad: profile(): pres= 85.12db prdp= 84.40m mwdp= 0.0 ipwr=13.9v epwr=26.9v il_f=0.36a Oct 09 2024 12:12:00 orcad: movePackageUp(): pressureDepth = 20.923019; Pm1(recent)-4(older) = 21.101500, 21.274031, 21.430697, 21.582406 Oct 09 2024 12:12:01 orcad: profile(): pres= 20.83db prdp= 20.66m mwdp= 0.0 ipwr=13.9v epwr=26.7v il_f=0.50a Oct 09 2024 12:12:03 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15677.HEX Oct 09 2024 12:14:28 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 10 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 10 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 10 2024 00:00:07 orcad: profile(): Running profile with sunsaver! Oct 10 2024 00:00:14 orcad: profile(): pres= 20.88db prdp= 20.70m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 10 2024 00:03:10 orcad: movePackageUp(): pressureDepth = 3.978513; Pm1(recent)-4(older) = 4.136185, 4.454502, 4.716295, 4.875949 Oct 10 2024 00:03:11 orcad: profile(): pres= 3.73db prdp= 3.70m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.22a Oct 10 2024 00:08:05 orcad: profile(): pres= 85.08db prdp= 84.35m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 10 2024 00:12:11 orcad: movePackageUp(): pressureDepth = 20.790149; Pm1(recent)-4(older) = 21.001352, 21.169917, 21.295845, 21.439621 Oct 10 2024 00:12:12 orcad: profile(): pres= 20.74db prdp= 20.56m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.21a Oct 10 2024 00:12:15 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15678.HEX Oct 10 2024 00:14:40 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 10 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 10 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 10 2024 12:00:07 orcad: profile(): Running profile with sunsaver! Oct 10 2024 12:00:15 orcad: profile(): pres= 20.71db prdp= 20.53m mwdp= 0.0 ipwr=13.9v epwr=27.2v Oct 10 2024 12:03:11 orcad: movePackageUp(): Status = EPRST; According to the CTD the winch isn't moving! ( CTD Pressure Threshold = 0.150000, actual change = -0.004958 ) Oct 10 2024 12:03:11 orcad: movePackageUp(): pressureDepth = 4.544741; Pm1(recent)-4(older) = 4.549699, 4.525900, 4.531850, 4.539783 Oct 10 2024 12:03:11 orcad: movePackageUp(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000 Oct 10 2024 12:03:11 orcad: movePackageUp(): loop counts ( i ) = 97 Oct 10 2024 12:03:12 orcad: profile(): Failed to move package up (status = -9). The package may no longer be at parking depth! Oct 10 2024 12:03:14 orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3 Oct 10 2024 12:03:14 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15679.HEX Oct 10 2024 12:04:10 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 11 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 11 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 11 2024 00:00:07 orcad: profile(): Running profile with sunsaver! Oct 11 2024 00:00:14 orcad: profile(): pres= 19.55db prdp= 19.39m mwdp= 0.0 ipwr=13.9v epwr=26.4v Oct 11 2024 00:03:06 orcad: movePackageUp(): pressureDepth = 3.871416; Pm1(recent)-4(older) = 4.073711, 4.266090, 4.401945, 4.630022 Oct 11 2024 00:03:07 orcad: profile(): pres= 3.70db prdp= 3.67m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.25a Oct 11 2024 00:08:00 orcad: profile(): pres= 84.94db prdp= 84.21m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 11 2024 00:12:06 orcad: movePackageUp(): pressureDepth = 20.982512; Pm1(recent)-4(older) = 21.183799, 21.340466, 21.526879, 21.658756 Oct 11 2024 00:12:07 orcad: profile(): pres= 20.88db prdp= 20.71m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.20a Oct 11 2024 00:12:09 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15680.HEX Oct 11 2024 00:14:35 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 11 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 11 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 11 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 11 2024 12:00:14 orcad: profile(): pres= 20.94db prdp= 20.77m mwdp= 0.0 ipwr=13.9v epwr=27.0v Oct 11 2024 12:03:09 orcad: movePackageUp(): pressureDepth = 3.865466; Pm1(recent)-4(older) = 4.034045, 4.202625, 4.379137, 4.542758 Oct 11 2024 12:03:10 orcad: profile(): pres= 3.63db prdp= 3.60m mwdp= 0.0 ipwr=13.9v epwr=26.9v il_f=0.53a Oct 11 2024 12:07:56 orcad: profile(): pres= 85.08db prdp= 84.36m mwdp= 0.0 ipwr=13.9v epwr=27.3v il_f=0.39a Oct 11 2024 12:11:55 orcad: movePackageUp(): pressureDepth = 20.971605; Pm1(recent)-4(older) = 21.139179, 21.304769, 21.466394, 21.634959 Oct 11 2024 12:11:56 orcad: profile(): pres= 20.87db prdp= 20.70m mwdp= 0.0 ipwr=13.9v epwr=27.3v il_f=0.54a Oct 11 2024 12:11:58 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15681.HEX Oct 11 2024 12:14:24 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 12 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 12 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 12 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 12 2024 00:00:14 orcad: profile(): pres= 20.86db prdp= 20.69m mwdp= 0.0 ipwr=13.9v epwr=26.4v Oct 12 2024 00:03:09 orcad: movePackageUp(): pressureDepth = 3.977522; Pm1(recent)-4(older) = 4.141143, 4.296831, 4.452518, 4.622089 Oct 12 2024 00:03:11 orcad: profile(): pres= 3.73db prdp= 3.70m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.23a Oct 12 2024 00:08:02 orcad: profile(): pres= 85.04db prdp= 84.32m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.07a Oct 12 2024 00:12:08 orcad: movePackageUp(): pressureDepth = 20.889305; Pm1(recent)-4(older) = 21.044981, 21.216521, 21.385086, 21.530845 Oct 12 2024 00:12:09 orcad: profile(): pres= 20.81db prdp= 20.63m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.01a Oct 12 2024 00:12:11 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15682.HEX Oct 12 2024 00:14:37 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 12 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 12 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 12 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 12 2024 12:00:14 orcad: profile(): pres= 20.36db prdp= 20.19m mwdp= 0.0 ipwr=13.9v epwr=27.7v Oct 12 2024 12:03:06 orcad: movePackageUp(): pressureDepth = 3.985455; Pm1(recent)-4(older) = 4.158992, 4.328563, 4.497142, 4.663738 Oct 12 2024 12:03:07 orcad: profile(): pres= 3.72db prdp= 3.69m mwdp= 0.0 ipwr=13.9v epwr=27.6v il_f=1.65a Oct 12 2024 12:07:55 orcad: profile(): pres= 85.05db prdp= 84.32m mwdp= 0.0 ipwr=13.8v epwr=27.8v il_f=0.67a Oct 12 2024 12:11:57 orcad: movePackageUp(): pressureDepth = 20.997386; Pm1(recent)-4(older) = 21.160993, 21.311710, 21.460444, 21.617110 Oct 12 2024 12:11:58 orcad: profile(): pres= 20.92db prdp= 20.75m mwdp= 0.0 ipwr=13.8v epwr=27.6v il_f=1.06a Oct 12 2024 12:12:00 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15683.HEX Oct 12 2024 12:14:25 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 13 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 13 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 13 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 13 2024 00:00:13 orcad: profile(): pres= 21.50db prdp= 21.32m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 13 2024 00:03:12 orcad: movePackageUp(): pressureDepth = 3.993388; Pm1(recent)-4(older) = 4.157009, 4.318647, 4.488217, 4.651838 Oct 13 2024 00:03:13 orcad: profile(): pres= 3.76db prdp= 3.73m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.28a Oct 13 2024 00:08:03 orcad: profile(): pres= 84.98db prdp= 84.25m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 13 2024 00:12:08 orcad: movePackageUp(): pressureDepth = 20.903187; Pm1(recent)-4(older) = 21.068778, 21.224453, 21.374179, 21.610170 Oct 13 2024 00:12:09 orcad: profile(): pres= 20.81db prdp= 20.64m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.19a Oct 13 2024 00:12:11 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15684.HEX Oct 13 2024 00:14:37 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 13 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 13 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 13 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 13 2024 12:00:14 orcad: profile(): pres= 19.76db prdp= 19.60m mwdp= 0.0 ipwr=13.8v epwr=27.7v Oct 13 2024 12:03:07 orcad: movePackageUp(): pressureDepth = 3.885299; Pm1(recent)-4(older) = 4.053878, 4.223449, 4.395995, 4.565565 Oct 13 2024 12:03:08 orcad: profile(): pres= 3.63db prdp= 3.60m mwdp= 0.0 ipwr=13.8v epwr=27.6v il_f=1.16a Oct 13 2024 12:08:26 orcad: profile(): pres= 85.07db prdp= 84.35m mwdp= 0.0 ipwr=13.8v epwr=27.7v il_f=0.79a Oct 13 2024 12:12:58 orcad: movePackageUp(): pressureDepth = 20.994411; Pm1(recent)-4(older) = 21.090592, 21.189748, 21.286921, 21.380128 Oct 13 2024 12:12:59 orcad: profile(): pres= 20.92db prdp= 20.75m mwdp= 0.0 ipwr=13.8v epwr=27.5v il_f=0.68a Oct 13 2024 12:13:01 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15685.HEX Oct 13 2024 12:15:34 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 14 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 14 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 14 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 14 2024 00:00:14 orcad: profile(): pres= 24.29db prdp= 24.08m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 14 2024 00:03:21 orcad: movePackageUp(): pressureDepth = 3.926948; Pm1(recent)-4(older) = 4.094536, 4.256173, 4.416819, 4.579448 Oct 14 2024 00:03:22 orcad: profile(): pres= 3.70db prdp= 3.67m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.22a Oct 14 2024 00:08:17 orcad: profile(): pres= 85.07db prdp= 84.35m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 14 2024 00:12:24 orcad: movePackageUp(): pressureDepth = 20.968630; Pm1(recent)-4(older) = 21.125297, 21.284938, 21.436647, 21.591330 Oct 14 2024 00:12:26 orcad: profile(): pres= 20.90db prdp= 20.72m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.03a Oct 14 2024 00:12:28 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15686.HEX Oct 14 2024 00:14:56 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 14 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 14 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 14 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 14 2024 12:00:14 orcad: profile(): pres= 19.53db prdp= 19.36m mwdp= 0.0 ipwr=13.9v epwr=27.1v Oct 14 2024 12:03:10 orcad: movePackageUp(): pressureDepth = 3.899182; Pm1(recent)-4(older) = 4.054870, 4.218491, 4.363271, 4.509042 Oct 14 2024 12:03:12 orcad: profile(): pres= 3.63db prdp= 3.60m mwdp= 0.0 ipwr=13.9v epwr=26.9v il_f=0.33a Oct 14 2024 12:08:57 orcad: profile(): pres= 84.95db prdp= 84.23m mwdp= 0.0 ipwr=13.9v epwr=26.9v il_f=0.22a Oct 14 2024 12:13:56 orcad: movePackageUp(): pressureDepth = 20.985487; Pm1(recent)-4(older) = 21.120339, 21.237343, 21.356331, 21.457470 Oct 14 2024 12:13:58 orcad: profile(): pres= 20.99db prdp= 20.82m mwdp= 0.0 ipwr=13.9v epwr=26.7v il_f=0.47a Oct 14 2024 12:14:00 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15687.HEX Oct 14 2024 12:16:42 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 15 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 15 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 15 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 15 2024 00:00:14 orcad: profile(): pres= 24.21db prdp= 24.01m mwdp= 0.0 ipwr=13.9v epwr=26.4v Oct 15 2024 00:03:22 orcad: movePackageUp(): pressureDepth = 3.849600; Pm1(recent)-4(older) = 4.022146, 4.275015, 4.419794, 4.576474 Oct 15 2024 00:03:23 orcad: profile(): pres= 3.64db prdp= 3.61m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.29a Oct 15 2024 00:08:33 orcad: profile(): pres= 84.98db prdp= 84.25m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 15 2024 00:12:58 orcad: movePackageUp(): pressureDepth = 20.932934; Pm1(recent)-4(older) = 21.085635, 21.230402, 21.375170, 21.525887 Oct 15 2024 00:12:59 orcad: profile(): pres= 20.90db prdp= 20.72m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.25a Oct 15 2024 00:13:01 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15688.HEX Oct 15 2024 00:15:34 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 15 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 15 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 15 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 15 2024 12:00:14 orcad: profile(): pres= 21.17db prdp= 20.99m mwdp= 0.0 ipwr=13.9v epwr=26.8v Oct 15 2024 12:03:12 orcad: movePackageUp(): pressureDepth = 3.902157; Pm1(recent)-4(older) = 4.061811, 4.228407, 4.386078, 4.539783 Oct 15 2024 12:03:13 orcad: profile(): pres= 3.66db prdp= 3.63m mwdp= 0.0 ipwr=13.9v epwr=26.7v il_f=0.47a Oct 15 2024 12:08:35 orcad: profile(): pres= 84.98db prdp= 84.25m mwdp= 0.0 ipwr=13.9v epwr=26.7v il_f=0.22a Oct 15 2024 12:13:13 orcad: movePackageUp(): pressureDepth = 20.921035; Pm1(recent)-4(older) = 21.051922, 21.305761, 21.427723, 21.543735 Oct 15 2024 12:13:14 orcad: profile(): pres= 20.92db prdp= 20.75m mwdp= 0.0 ipwr=13.9v epwr=26.5v il_f=0.43a Oct 15 2024 12:13:16 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15689.HEX Oct 15 2024 12:15:52 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 16 2024 00:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 16 2024 00:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 16 2024 00:00:06 orcad: profile(): Running profile with sunsaver! Oct 16 2024 00:00:14 orcad: profile(): pres= 22.66db prdp= 22.46m mwdp= 0.0 ipwr=13.9v epwr=26.4v Oct 16 2024 00:03:16 orcad: movePackageUp(): pressureDepth = 3.896207; Pm1(recent)-4(older) = 4.058836, 4.216508, 4.375170, 4.539783 Oct 16 2024 00:03:17 orcad: profile(): pres= 3.66db prdp= 3.63m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.24a Oct 16 2024 00:08:26 orcad: profile(): pres= 85.01db prdp= 84.28m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.06a Oct 16 2024 00:12:50 orcad: movePackageUp(): pressureDepth = 20.974580; Pm1(recent)-4(older) = 21.123314, 21.278989, 21.429706, 21.573482 Oct 16 2024 00:12:51 orcad: profile(): pres= 20.90db prdp= 20.73m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.22a Oct 16 2024 00:12:53 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15690.HEX Oct 16 2024 00:15:25 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 16 2024 10:11:57 orcad: cleanup(): Caught exit signal ( 15 )! Attempting to shutdown cleanly... Oct 16 2024 10:11:57 orcad: cleanup(): All lights are shut off, the stove is off and the cat is fed. Leaving for good. Cya! Oct 16 2024 10:12:20 orcad: Starting up ( version 0.9.17_test )... Oct 16 2024 10:12:27 orcad: initializeHardware(): Sunsaver Measurements: battery voltage: 26.605225, array voltage: 31.051636, load voltage: 26.699829, charging current: 0.545964, load current: 0.231914 GLOBAL PARAMETERS ----------------- isDaemon = 0 debugLevel = 4 configFileName = /usr/local/orcaD/orcad.cfg min_depth = 3 max_depth = 85 parking_depth = 20 data_file_prefix = ORCA3_CAST data_storage_dir = /usr/local/orcaD/data last_cast_num = 15690 weather_data_prefix = ORCA3_MET weather_archive_download_period = 1440 weather_status_filename = weather-status.dat ctd_cal_PA1 = 2.482456e+02 ctd_cal_PA2 = -6.524518e-02 ctd_cal_PA3 = 5.430179e-08 solar_calibration_constant = 6.490000e+00 INFO: Assuming Licor 2420 Light Sensor Amplifier with 0.150 gain compass_declination = 1.600000e+01 meterwheel_cfactor = 1.660000e-01 SERIAL DEVICES -------------- RS232 Port description = A happy little CTD device_type = SEABIRD_CTD_19_PLUS tty = /dev/ttyUSB1 baud = 9600 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = GILLMETPAK tty = /dev/ttyUSB2 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little WeatherStation device_type = S9VAISALA tty = /dev/ttyUSB3 baud = 19200 stop_bits = 1 data_bits = 8 flow_control = none parity = none RS232 Port description = A happy little seafet device_type = SUNSAVER tty = /dev/ttyUSB7 baud = 9600 stop_bits = 2 data_bits = 8 flow_control = none parity = none MISSIONS -------- name = Deep_Cast_Direct start_min = 0 start_hour = 12 start_day_of_month = * start_month = * start_day_of_week = * equilibration_time = 20 aux_sample_direction = down cycles = 1.0 depths = Oct 16 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 16 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 16 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 16 2024 12:00:14 orcad: profile(): pres= 21.08db prdp= 20.90m mwdp= 0.0 ipwr=13.9v epwr=27.0v Oct 16 2024 12:03:09 orcad: movePackageUp(): pressureDepth = 3.909098; Pm1(recent)-4(older) = 4.078669, 4.236340, 4.407895, 4.585398 Oct 16 2024 12:03:10 orcad: profile(): pres= 3.66db prdp= 3.63m mwdp= 0.0 ipwr=13.9v epwr=27.3v il_f=0.56a Oct 16 2024 12:08:11 orcad: profile(): pres= 85.03db prdp= 84.30m mwdp= 0.0 ipwr=13.9v epwr=27.5v il_f=0.39a Oct 16 2024 12:12:34 orcad: movePackageUp(): pressureDepth = 20.960698; Pm1(recent)-4(older) = 21.102491, 21.245276, 21.387069, 21.527870 Oct 16 2024 12:12:35 orcad: profile(): pres= 20.92db prdp= 20.75m mwdp= 0.0 ipwr=13.9v epwr=26.8v il_f=0.57a Oct 16 2024 12:12:37 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15691.HEX Oct 16 2024 12:15:07 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 17 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 17 2024 12:00:07 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 17 2024 12:00:07 orcad: profile(): Running profile with sunsaver! Oct 17 2024 12:00:14 orcad: profile(): pres= 21.98db prdp= 21.79m mwdp= 0.0 ipwr=13.9v epwr=26.8v Oct 17 2024 12:03:13 orcad: movePackageUp(): pressureDepth = 3.875382; Pm1(recent)-4(older) = 4.038012, 4.174859, 4.329555, 4.515983 Oct 17 2024 12:03:15 orcad: profile(): pres= 3.63db prdp= 3.60m mwdp= 0.0 ipwr=13.9v epwr=26.7v il_f=0.43a Oct 17 2024 12:08:05 orcad: profile(): pres= 85.08db prdp= 84.36m mwdp= 0.0 ipwr=13.9v epwr=26.8v il_f=0.36a Oct 17 2024 12:12:09 orcad: movePackageUp(): pressureDepth = 20.916078; Pm1(recent)-4(older) = 21.067787, 21.233377, 21.387069, 21.538777 Oct 17 2024 12:12:10 orcad: profile(): pres= 20.84db prdp= 20.66m mwdp= 0.0 ipwr=13.9v epwr=26.8v il_f=0.34a Oct 17 2024 12:12:12 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15692.HEX Oct 17 2024 12:14:38 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 18 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 18 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 18 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 18 2024 12:00:14 orcad: profile(): pres= 20.76db prdp= 20.59m mwdp= 0.0 ipwr=13.9v epwr=26.5v Oct 18 2024 12:03:12 orcad: movePackageUp(): pressureDepth = 3.875382; Pm1(recent)-4(older) = 4.008263, 4.145109, 4.237332, 4.354346 Oct 18 2024 12:03:13 orcad: profile(): pres= 4.06db prdp= 4.03m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=1.40a Oct 18 2024 12:08:04 orcad: profile(): pres= 84.98db prdp= 84.25m mwdp= 0.0 ipwr=13.9v epwr=26.4v il_f=0.07a Oct 18 2024 12:12:14 orcad: movePackageUp(): pressureDepth = 20.802048; Pm1(recent)-4(older) = 21.016225, 21.199664, 21.321626, 21.436647 Oct 18 2024 12:12:16 orcad: profile(): pres= 20.80db prdp= 20.63m mwdp= 0.0 ipwr=13.9v epwr=26.3v il_f=0.29a Oct 18 2024 12:12:18 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15693.HEX Oct 18 2024 12:14:44 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 19 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 19 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 19 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 19 2024 12:00:13 orcad: profile(): pres= 20.36db prdp= 20.19m mwdp= 0.0 ipwr=13.9v epwr=26.7v Oct 19 2024 12:03:11 orcad: movePackageUp(): Status = EPRST; According to the CTD the winch isn't moving! ( CTD Pressure Threshold = 0.150000, actual change = 0.002975 ) Oct 19 2024 12:03:11 orcad: movePackageUp(): pressureDepth = 8.306001; Pm1(recent)-4(older) = 8.247495, 8.168165, 8.213780, 8.308975 Oct 19 2024 12:03:11 orcad: movePackageUp(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000 Oct 19 2024 12:03:11 orcad: movePackageUp(): loop counts ( i ) = 98 Oct 19 2024 12:03:12 orcad: profile(): Failed to move package up (status = -9). The package may no longer be at parking depth! Oct 19 2024 12:03:14 orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3 Oct 19 2024 12:03:14 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15694.HEX Oct 19 2024 12:04:10 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 20 2024 12:00:01 orcad: runJobs(): Running mission: Deep_Cast_Direct Oct 20 2024 12:00:06 orcad: profile(): NOTE: Running profile without a meterwheel. Winch control based on CTD pressure only. Oct 20 2024 12:00:06 orcad: profile(): Running profile with sunsaver! Oct 20 2024 12:00:14 orcad: profile(): pres= 8.26db prdp= 8.19m mwdp= 0.0 ipwr=13.9v epwr=27.8v Oct 20 2024 12:00:14 orcad: profile(): Warning package is *not* within 5 meters of parking depth ( 20 )! Continuing! Oct 20 2024 12:02:26 orcad: movePackageUp(): Status = EPRST; According to the CTD the winch isn't moving! ( CTD Pressure Threshold = 0.150000, actual change = 0.011900 ) Oct 20 2024 12:02:26 orcad: movePackageUp(): pressureDepth = 7.720942; Pm1(recent)-4(older) = 7.761599, 7.781431, 7.795314, 7.732842 Oct 20 2024 12:02:26 orcad: movePackageUp(): meterWheelDepth = 0.000000; mcnt1-4 = 0.000000, 0.000000, 0.000000, 0.000000 Oct 20 2024 12:02:26 orcad: movePackageUp(): loop counts ( i ) = 9 Oct 20 2024 12:02:27 orcad: profile(): Failed to move package up (status = -9). The package may no longer be at parking depth! Oct 20 2024 12:02:29 orcad: runJobs(): Mission Deep_Cast_Direct profile returned: -3 Oct 20 2024 12:02:29 orcad: runJobs(): Creating /usr/local/orcaD/data/202410/ORCA3_CAST15695.HEX Oct 20 2024 12:03:17 orcad: runJobs(): Completed mission: Deep_Cast_Direct Oct 20 2024 15:09:06 orcad: cleanup(): Caught exit signal ( 15 )! Attempting to shutdown cleanly... Oct 20 2024 15:09:06 orcad: cleanup(): All lights are shut off, the stove is off and the cat is fed. Leaving for good. Cya!